Splice Type METFLUON P33
Description
Seam in plate of high quality PTFE-based , foam loaded with barium sulfate,that can provide a ‘good seal even with low loads of tightening, but also in severe conditions.
Applications
Acids and strong alkalis, for the prevention of fugitive emissions, flage worn, chemical, petrochemical, food and pharmaceutical
ASTM D 1457
2.2 g/cm3
Temperature range
-200 ± +260°C
Max. pressure
80 bar
Chemical resistance range
da 0 a 14 pH
Compressibility
ASTM F 36
19%
Elasticity
ASTM F 36
40%
Tensile strenght (min.)
ASTTM D 1457
12 mpa
Elongation at break
ASTTM D 1457
420%
Stress retention (30 mpa – 150°C – 24 Hours)
DIN 52913
≥17 mpa
Resistance to compressibility
DIN 28090
≥80 mpa
Permeability to nitrogen
ASTM F 37
<0,001 mg/s.m
Conducibilità termica
DIN 3535/4-28090
0.4 W/m°C
Factors Clamping PVRC
Thickness 2,2 mm.
Gb
6.3 mpa
a
0,23
Gs
0.002 mpa
*The data listed depend on a variety of factors (state of the joints, dimensions, clamping, thermal and mechanical shock etc.) To which can be indicated for orientation purpose.
