Splice Type MET 400
Description
Seam in high quality plate composed of aramidics fibers and fillers bonded with heat-resistant NBR high acrylonitrile content suitable for medium to high temperatures and pressures: solvents, gases, oils, hydrocarbons, low pressure steam and alkalis and weak acids.
Applications
Solvents, gases, oils, hydrocarbons, low pressure steam and alkalis and weak acids
DIN3754
1,7 g/cm3
Max. temperature
370°C
Wwork range temperature
320°C
Max. temperature with steam
200°C
Max. work range pressure
100 bar
Compressibility
ASTM F36
8%
Elasticity
ASTM F36
55%
Stress retention 16 hours – 175°C. 50 N/mm2
DIN 52913
30 N/mm2
Tensile strenght (min.)
DIN52913
11 N/mm2
Permeability to nitrogen
DIN 3535/4
0,5 ml/min
Loss on ignition
DIN 52911
30%
Diving behavior ASTM F146 – in oil ASTM n°3 for 5 hours at 150°C
Weigth increase
10%
Thickness increase
5%
Diving behavior ASTM F146 – in oil ASTM n°3 for 5 hours at 150°C
Weigth increase
10%
Thickness increase
5%
Tensile strenght (min.)
7 N/mm2
Factors Clamping ASME – VSR
Thickness 1,5 mm.
3,0 mm.
Y
25 Mpa
11 Mpa
M
2,75 Mpa
2,00 Mpa
Factors Clamping ASME – (draft 1994)
Thickness 2,2 mm.
Gb
13 mpa
A
0,21
Gs
0,1 mpa
*The data listed depend on a variety of factors (state of the joints, dimensions, clamping, thermal and mechanical shock etc.) To which can be indicated for orientation purpose.
